Table of Contents
Advertisement
2.7 Reset Button
The reset button is used to perform a reset to the device. It is not used in normal cases and can be used for
diagnostic purpose. If any network hanging problem is suspected, it is useful to push the button to reset the
device without turning off the power. Check whether the network is recovered.
The button can also be used to restore the software configuration settings to factory default values.
The operations are:
Operation
Press the button and release during operation
Press the button when boot-up until all LEDs blink.
Function
Reset & boot up the device. The behavior is
same as power boot procedure.
Boot & restore all factory default settings
-20-
Advertisement
Table of Contents
