3. SERVICE PROGRAM MODE
Accessing Service Programs
The service programs can be set by
following this procedure.
Reference
For the service program menu, see
P.55 "Service Program Menu".
A
Press the { { { { Clear Modes} } } } key.
B
Hold down the { { { { Clear/Stop} } } } key
for at least 3 seconds.
The SP-mode display appears on
the guidance display.
Note
If you press the wrong key, try
pressing the above keys from
the beginning.
C
With the { { { { Number} } } } keys, enter the
desired service program number
(SP No.).
Reference
For the SP No., see
vice Program Menu".
TSLS01UN
When you want to leave the
service program mode
A Press the { { { { Clear Modes} } } } key.
TSLS01AN
Reference
If you want to change the set-
tings of a selected service
program, see
ing The Settings Of Service
Programs".
TSLS011N
P.55 "Ser-
TSLS01UN
P.54 "Chang-
53