Setting The System Date And Time; Call Logging - Mitel SX-200 User Manual

Setting the System Date and Time

You can change the time and date that appears on all Mitel telephones equipped with displays. The time
can be displayed in either a 12- or 24-hour format, depending on system programming.
To set the system time:
1. Press the key you have programmed as Superkey.
2. Press More until Time appears and then press Time.
3. Using the dial pad, enter the time in the indicated format.
4. Press the AM or PM softkeys (if necessary).
5. Press the Save softkey.
To set the system date:
1. Press the key you have programmed as Superkey.
2. Press More until Date appears and then press Date.
3. Using the dial pad, enter the date in the indicated format.
4. Press the Save softkey.

Call Logging

Call Logging keeps track of the names (if available) and telephone numbers of all your incoming calls or
only those you missed.
To program your phone to log your incoming calls:
1. Press the key you have programmed as Superkey.
2. Press the Call Logging softkey.
3. Press the Missed Calls or All Calls softkey.
4. Press the Internal softkey to log calls from other extensions only, External to log outside calls
only, or Both to log internal and external calls.
To turn off call logging:
1. Press the key you have programmed as Superkey.
2. Press the Call Logging softkey.
3. Press the Turn Off softkey.
To display the call log:
1. Press the key you have programmed as Superkey.
2. Press the Callers softkey to display the number of new calls and old calls.
3. Press the New Calls or Old Calls softkey to display call details. (Note: These softkeys are not
visible until calls have been logged.)
4. If more than one call is logged, use the Next and Previous softkeys to display the others.
Subattendant User Guide for the Mitel 5340 IP Phone
- 5 -