Table of Contents
Advertisement
Remote Control Operation
Modem
Command:
Operations/
Response:
Misc.
Information
Interface
Command:
Firmware
Response:
Information
State of
Command:
Product
Response:
B–20
<add/MOI_'cr'
>add/MOI_'cr'
s, OEM_LCD'cr'
s, 8PSK'CR''If']
<add/IFI_'cr'
>add/IFI_'cr'
FW/nnnnnn-ddr'cr'
mm/dd/yyyy'cr''lf']
<add/SOP_'cr'
>add/SOP_'cr'
Product address: add'cr'
Data Format; abc'cr'
Baud Rate: rrrrr bps'cr'
Comm Type: <var-string1>'cr'
<var-sring2>'cr''lf']
SDM-2020 Satellite Demodulator
Where: s = (-) Not Installed, FAST Upgradable, (+) Installed.
Where: nnnnnn = Firmware number (0 to 999999)
dd = Firmware dash number (0 to 99)
r = Firmware revision (–, or A to Z)
Note: If dash number is not used, "-dd" willb e reported.
Where abc =
Expalin as follows:
a = Number of data bits (7)
b = Parity type (O, E, N)
c = Number of Stop Bits (1)
rrrrr = Baud rate (150, 300, 600, 1200, 2400,
<var-string1> = Variable length strings explaining
communication
hardware type:
RS-485 (2-wire)
RS-485 (4-wire)
RS-232
<var-string2> = Variable length strings explaining the intention
of
the product.
"Under normal system operation"
"REFLASH of BULK firmware required"
"REFLASH of M&C firmware required"
4800, 9600, 14400, 19200)
Rev. 3
Advertisement
Table of Contents
