Installation
2.2.1
Data Interfaces
Note: Refer to Appendix A for available data interfaces.
CAUTION
The data interface is a removable, plug-in module that provides a terrestrial connection
to the demodulator. An interface consists of a Printed Circuit Board (PCB) attached to a
faceplate. The faceplate contains connectors appropriate for the interface type, and two
captive mounting screws.
Figure 2-2 is an example of a typical data interface.
2–4
To avoid damaging the demodulator, always disconnect the power
before removing or installing a data interface.
Figure 2-2. Typical Data Interface Module
SDM-2020 Satellite Demodulator
Rev. 3