License Plate Lamp; Replacement Bulbs - Saturn 2009 VUE Green Line Hybrid Owner's Manual

1. Open the liftgate.
2. Remove the two screws holding
in the taillamp assembly.
3. Slide the taillamp assembly
rearward and away from the
vehicle.
4. Turn the bulb socket being
replaced counterclockwise
to disconnect it.
5. Pull the bulb out of the bulb
socket.
6. Push the new bulb into the
bulb socket.
7. Reverse Steps 2 through 4 to
reinstall the taillamp assembly.

License Plate Lamp

To replace one of these bulbs:
1. Remove the two screws holding
each of the license plate lamps
to the fascia.
2. Turn and pull the license plate
lamp forward through the
fascia opening.
3. Turn the bulb socket
counterclockwise and pull the
bulb straight out of the socket.
Service and Appearance Care
4. Push the new bulb into the bulb
socket and turn it clockwise to
lock it into place.
5. Push and turn the license plate
back through the fascia opening.
6. Reinstall the two screws holding
the license plate lamps to the
fascia.

Replacement Bulbs

Exterior Lamp
Back-up Lamp
Front Turn
Signal/Parking
Headlamps
High-beam
Low-beam/DRL
Rear Turn Signal,
Stoplamp and
Taillamp
For replacement bulbs not listed
here, contact your dealer/retailer.
5-37
Bulb
Number
3156
3157K
9005 or
HB3
9006 or
HB4
3057