Saturn 2009 VUE Green Line Hybrid Owner's Manual page 175

Bluetooth functions before pairing
the cell phone. If a Bluetooth phone
is not connected, calls will be
®
made using OnStar Hands-Free
Calling, if available. Refer to
the OnStar owner's guide for more
information.
Pairing Information:
•
Up to five cell phones can be
paired to the in-vehicle
Bluetooth system.
•
The pairing process is disabled
when the vehicle is moving.
•
The in-vehicle Bluetooth system
automatically links with the first
available paired cell phone in the
order the phone was paired.
•
Only one paired cell phone can
be connected to the in-vehicle
Bluetooth system at a time.
•
Pairing should only need to be
completed once, unless changes
to the pairing information have
been made or the phone is
deleted.
To link to a different paired phone,
see Linking to a Different Phone
later in this section.
Pairing a Phone
J 0
1. Press and hold /
two seconds. The system
responds with "Ready" followed
by a tone.
2. Say "Bluetooth". The system
responds with "Bluetooth
ready" followed by a tone.
3. Say "Pair". The system responds
with instructions and a four digit
PIN number. The PIN number
will be used in Step 4.
4. Start the Pairing process on the
cell phone that will be paired to
the vehicle. Reference the
cell phone manufacturers user
guide for information on this
process.
Instrument Panel
Locate the device named
"General Motors" in the list on the
cellular phone and follow the
instructions on the cell phone to
enter the four digit PIN number
that was provided in Step 3.
for
5. The system prompts for a name
for the phone. Use a name that
best describes the phone.
This name will be used to
indicate which phone is
connected. The system then
confirms the name provided.
6. The system responds with
"<Phone name> has been
successfully paired" after the
pairing process is complete.
7. Repeat Steps 1 through 7 for
additional phones to be paired.
3-73