License Plate Lamp
To replace one of these bulbs:
1. Remove the two screws holding each of the license
plate lamps to the fascia.
2. Turn and pull the license plate lamp forward
through the fascia opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the license
plate lamp.
Replacement Bulbs
Exterior Lamp
Back-up Lamp
Front Turn Signal/Parking Lamp
High-Beam Headlamp
Low-Beam Headlamp
Rear Turn Signal Lamp
Stoplamp/Taillamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
3157K LL
3457NAK
9005LL
H11
4157NAK
3157K LL
5-49