License Plate Lamp
To replace one of these bulbs, do the following:
1. Remove the two screws holding each of
the license plate lamps to the fascia.
2. Turn and pull the license plate lamp forward
through the fascia opening.
3. Turn the bulb socket counterclockwise and
pull the bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the
license plate lamp.
364
Replacement Bulbs
Exterior Lamp
Back-up
CHMSL
Front Turn Signal/Parking
Headlamps
High-beam
Low-beam/DRL
Rear Turn Signal, Stoplamp and
Taillamp
For replacement bulbs not listed here, contact
your dealer/retailer.
Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected for
wear and cracking. See Scheduled Maintenance
on page 420 for more information.
Replacement blades come in different types and
are removed in different ways. For proper type and
length, see Normal Maintenance Replacement
Parts on page 434.
Bulb Number
3156
W5W
3157K
9005 or HB3
9006 or HB4
3057