Taillamps, Turn Signal, Stoplamps And Back-Up Lamps - Saturn 2007 Vue Owner's Manual

Saturn 2007 vue automobile owner's manual
Hide thumbs Also See for 2007 Vue:
Table of Contents

Advertisement

Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
To replace one of these bulbs, do the following:
1. Open the liftgate. See Liftgate on page 103 for
more information.
2. Remove the two screws retaining the taillamp
assembly.
4. Disconnect the electrical connector and
remove it from the taillamp assembly.
3. Slide the taillamp
assembly rearward
and away from
the vehicle.
5. Turn the bulb socket being replaced
counterclockwise to disconnect it.
6. Pull the bulb out of the bulb socket.
7. Push the new bulb into the bulb socket.
8. Reverse Steps 2 through 4 to reinstall the
taillamp assembly.
363

Advertisement

Table of Contents
loading

Table of Contents