Table of Contents
Advertisement
Congratulations on your purchase of an Sunbeam High Performance Blender! Please visit
us at www.sunbeam.com.au OR www.sunbeam.co.nz.
1. Filler Cap
60 ml filler cap doubles as a measuring
cup. Align notch with the hole to insert in
lid; turn clockwise to secure in place.
Remove from lid to add ingredients while
blending.
2. Lid (Flap goes on opposite side of pour
spout)
Seals the jug.
3. Jug & Blade Assembly
Your Sunbeam High Performance Blender
comes with one BPA-Free durable Tritan
Plastic 1.9L jug with stainless-steel blades
that are permanently attached for expert
blending, DO NOT attempt to remove blade
assemble.
4. Control Panel
Includes a 8 speed dial, 3 pre-programmed
settings (SOUP, SMOOTHIE, DIPS/
SPREADS) and PULSE.
5. Fuse
Incorporated to protect the motor from
overheating. If the motor shuts off while in
use: Turn control knob to OFF and unplug
from the wall.
Remove jug from base and free blade of
any obstructions. Press external resettable
fuse button on the bottom of the base. Wait
30-45 minutes for the unit to cool.
6. Cord Storage
Space on the bottom of the base to store
the cord while not in use.
7. Tamper
After blending has started, remove the
filler cap and place the tamper through the
opening in the lid to assist with pushing the
food down to the blade.
Note: The tamper is not long enough to
reach the blade.
Before you use the product for the first time,
separate the Tamper, Lid, Filler Cap, and
Jug. Wash in warm, soapy water. Rinse and
dry well.
3
Advertisement
Table of Contents
