Online Command Mode - SATO MB200i Service Manual

Unit 5: Printer Configuration

ONLINE COMMAND MODE

This function allows the selection of receiving command by using either standard SATO Barcode
Printer Language (SBPL) or first generation MB200 compatible commands. The MB200
compatible command option should only be chosen if first generation MB200's will be used along
with the newer generation. This will provide a common command language that will
communicate to both.
Refer to Figure 1-1 of the Introduction unit in this manual for dipswitch location.
Choose Applicable Option
MB200 Compatibility Mode: (DSW = 1: ON, 2: ON, 3: ON, 4: ON) + Cover Open + PRINT + POWER
SBPL Mode: (DSW = 1: ON, 2: ON, 3: ON, 4: ON) + Cover Open + FEED + POWER
Blinks green when setting
Online Command.
Flashes green when setting
completed.
Confirm setting is
complete.
Press POWER.
Printer shuts down.
Figure 5-6, Online Command Mode
SATO MB2i Service Manual PN 9001145B Page 5-11