Configuration Modes; Normal Mode - SATO MB 200i Operator's Manual

Sato printer user manual

Hide thumbs Also See for MB 200i:

Table of Contents

Unit 4: Operation and Configuration

CONFIGURATION MODES

This chapter provides an overview of the various configuration modes of the operation menu. All

of the following configuration activities are performed via the use of the operator panel located on

the printer front. However, many settings may also be controlled via software commands. In the

case of conflict between the software and control panel settings, the printer will always use the

last entered valid setting.

When in the Normal Mode the printer is online and ready for print activity. If print activity,

downloading, or other interaction does not occur, the printer will go into the Sleep Mode and from

there, into the Offline Mode.

RS232C: (DSW = OFF, OFF, OFF, OFF) + POWER

Wireless LAN: (DSW = OFF, ON, OFF, OFF) + POWER

Bluetooth: (DSW = OFF, ON, OFF, OFF) + POWER

Infrared: (DSW = ON, OFF, OFF, OFF) + POWER

Flashes orange,

goes online,

flashes green

LED

terminates and printer goes

offline

FEED

Label is fed

Figure 4-11, Normal Mode

MB200i Operator Manual

Page 4-13

Table of Contents