Table of Contents
Advertisement
4. CHANGING SPECIFICATIONS
3D DISPALY
SHIP'S POSITION
CURRENT DATA
DEPTH DATA
HEADING DISPLAY
NORTH MARK
TRACK
HDG/SPD DATA
NAV DATA
DATA FORMAT FOR NAV2 Selects data format for nav data; CIF (FURUNO) or
CIF BAND RATE
TVG CORRECTION
UNIT
V-MODE MANUAL TRAIN
DEGAUSSING INTERVAL
FACTORY SETTING
4-2
Table 4-1 System setting menu description
Item
Turns 3D mode on/off.
Turns position indication on/off and selects position for-
mat, latitude and longitude or Loram LOP.
Turns current (tide) data on/off.
Turns depth indication on/off.
Turns heading indication on/off and selects its format;
true bearing or azimuth (16 azimuth bearing).
Turns north maker on/off.
Selects length of courseline plotting; 10R (ten times the
range in use) or 20R (twenty times the range in use).
Selects source of data to be used to plot courseline; NAV
(Navigator), CI (Current Indicator).
Selects source of position data; GPS, LORAN C LORAN
A, DR, DECCA, OTHERS.
NMEA.
Select band rate of CIF data; 1200, 2400, 4800 bps.
Change TVG curve to compensate for absorption attenu-
ation of ultrasonic wave in water. OFF, Standard TVG
curve, 1/2, 1/2 of theoretical absorption value added to
TVG curse, 1 Full theoretical absorption value added to
TVG curve.
Select unit of depth mesurement. m, meters; ft feet; fa
fathoms, HIRO.
Selects manual training sector width for the vertical fan
mode. Half, half circle, Full , full circle.
Enter interval at which to have the screen degaussed.
OFF dehausses the screen at the maximum interval.
Yes restores default system menu settings.
Description
Advertisement
Table of Contents
