Table of Contents
Advertisement
1.5
Motion Sensor MS-100 (Option)
The MS-100 measures ship's pitching and rolling angles with sensors using the prin-
ciples of the gyroscope. The MS-100 is free from error caused by ship's vertical and
horizontal motion. Therefore, it can be installed at any convenient location. However,
ship's semi-permanent inclination due to loading imbalance cannot be detected. Com-
pensate for this as described in Chapter 3.
Mounting considerations
• Vibration in the mounting area should be
minimal.
• Locate the unit away from areas subject
to water splash.
• The ambient temperature should not ex-
ceed 50°C.
Mounting procedure
Orient the FORE mark on the unit toward the ship's bow and mount the unit level to
within 5° in all directions.
1.6
External Interface (Option)
This section shows how to install External E/S Interface (type OP06-13) and/or the Ex-
ternal Monitor Interface (type OP06-14).
For connecting external monitor, prepare mini D-SUB 15 pin cable (male-male).
Recommended cable : EVNPSO5-50ft, manufactured by Black Box Japan Co.,Ltd.
External monitor interface installation kit
External Monitor Interface Assy.
XH Connector Assy.
Screw
Screw
Cable Ties
Part
FORE
AFT
Type, Q'ty
–
06-313 (13-13P)
006-550-840
M3x6
000-881-103
M3x8
000-881-404
No.249
000-515-871
1. MOUNTING
θ≤ 5°
Code No.
Q'ty
–
1
1
4
1
1
1-15
Advertisement
Table of Contents
