Intended Use - IVT GTE-300 Manual

Instruction manual
TOOL SPECIFICATIONS
EN
Voltage ~ Frequency [V ~ Hz]
Rated power [W]
No-load speed [RPM]
Max. cutting width [mm]
Cutting line diameter [mm]
Vibration level [m/s
Sound pressure level [dB(A)]
Sound power level [dB(A)]
Weight [kg]
Safety class
PART LIST
1. Lock-off button
2. Switch On/Off
3. Front handle
4. Auxiliary handle
5. Motor frame
6. Safety guard
7. Cutting head
8. Ventilation openings
9. Head of motor frame
10. Head adjusting button
11. Pipe button
12. Telescopic pipe
13. Guide wheel
14. Cord restraint
15. Main frame
16. Safety guard fixing screws
17. Spool cap button
18. Spool cap
19. Trimmer spool
20. Cutting line
21. Spool holder eyelet
22. Trimmer spool eyelet
23. Slot
24. Line cutter
25. Knob
CONTENT OF THE BOX
Instruction manual (1 pc), safety guard (1 pc.).

INTENDED USE

This tool is intended for cutting lawns and small
areas of grass or similar soft vegetation in private and
hobby gardens and along bed edges, if equipped with
appropriate cutting attachment.
Model
]
2
GTE-300
230 ~ 50
300
10500
260
1.2
1.324 (K=1.5)
72 (K=3)
92 (K=3)
1.9
II
The device is not allowed to be used in public gardens,
parks, sports centres or at roadsides as well as in
agriculture and forestry.
Their light weight and manoeuvrability enable them to
be used in areas which are difficult to access and in
restricted spaces.
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user's manual and all other literature supplied
with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
∙
The tool must be assembled correctly before use.
∙ Only use the tool for its designed purposes.
∙
On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
∙
Never leave the tool unattended.
∙ Never allow children to use the tool. Children
should be supervised to ensure that they do not play
with the tool.
∙ Keep children and pets away. All onlookers should
be kept at a safe distance away from the tool when it
8
GTE-500
230 ~ 50
500
10500
280
1.2
0.774 (K=1.5)
72.7 (K=3)
92.7 (K=3)
2.8
II