Section 2: Safety; Safety Summary; Warning And Information Labels - Pentair PR AQUA ROTOFILTER Installation And Operation Manual

6

SECTION 2: SAFETY

2.1 Safety Summary

This safety summary contains warnings that must
be understood and applied during operation and
maintenance of the Rotofilter. Failure to obey these
precautions could result in damage to equipment,
serious injury, or death of personnel.
These are the icons used within the manual:
A Warning icon precedes an
essential operating or maintenance
procedure, practice, condition,
or statement, which, if not strictly observed, could
result in injury to or death of personnel or long-term
health issues
A Caution icon precedes an
essential operating or maintenance
procedure, practice, condition, or
statement, which, if not strictly observed, could
result in damage to or destruction of equipment.
A Note icon precedes an essential
NOTE
operating or maintenance
procedure, practice, condition,
or statement that should be heeded for maximum
product benefit.
Make sure you read all information in the Warnings,
Cautions, and Notes carefully. If any issues
are unclear, consult us. Additional safety
guidelines related to specific components of
the unit are described in the corresponding
component sections.

2.2 Warning and Information Labels

Warning and information labels are posted on the
Rotofilter. Read labels and note their locations
before operation, maintenance, or servicing of
the product. Ultraviolet (RFUV) models contain
additional labels. Refer to the UV manual for
applicable warnings and precautions.
PR Aqua Rotofilter Drum Filter Installation and Operation Manual
™
Automated Machinery:
This unit may start at any time.
STAY CLEAR.Lockout/tagout
before servicing.
Located on individual lid
panels
Pinch Point:
Do not operate without guards
in place.
Located on drum support
wheel finger guards
Ultraviolet (UV)
Radiation Inside:
Exposure may cause eye
damage. Do not operate
without coverings. Do not look
into UV source. Wear UV eye
protection.
Located on UV chamber
(RFUV only)
Hot Surface:
Contact may cause burn.
Allow to cool before servicing.
Located on UV module light
block shield (RFUV only)
Rotation:
Located on drive assembly
end