A Print Position Adjustment - SATO CL608e/CL612e Service Manual

Section 4. Electric Checks and Adjustments

4.5a Print Position Adjustment

VR 3
Note: The VR3 (PITCH) is for changing
the print position but not for the print
stop position. The stop position can be
changed with the VR2 (OFFSET).
VR3 adjustment range is
+/- 3.75mm.
POTENTIOMETERS ARE LOCATED
UNDERNEATH A FLIP - DOWN COVER
OF THE FRONT PANEL
STEP PROCEDURE
SATO CL608e/CL612e Service Manual
Page 4-8 PN 9001079
Rev. B