Table of Contents
Advertisement
Setup
n Outdoor camera (KX-HN7002/KX-HN7003/KX-HN1007)
A
C
D
A White LED lens
B Lens
C Infrared sensors
D LED indicator
E Microphone
F Light sensor
G Interface cover
*1
Used when performing initial setup.
*2
Used to connect the USB cable when charging.
LED indicators
You can use the LED indicators to confirm the status of the cameras.
Indicator
Off
Green or red, blinking quickly - off
for 1 second
Amber, lit
Green, lit
Green, blinking quickly
Red, lit
Red, blinking quickly
For assistance, please visit http://shop.panasonic.com/support
20
HN7001_(en_en)_1228_ver.030.pdf 20
B
E
F
G
H Speaker
I MSETUPN button
J Power slide switch
K Charging LED
L Camera nut
M USB cover/connection
N Wall mounting adaptor
Status
No power, or LED indicator is turned off
Camera is on
Power on until start up completed, or not registered to the
access point
Registration successfully completed or signal level is strong
Camera is searching for an access point
Registration failed, signal level is weak
motion
Streaming data
K
L
M
I
J
N
H
*1
*2
*1
, or detecting
2017/12/28 16:21:53
Advertisement
Table of Contents
