Ricoh D143 Field Service Manual page 1274

3. SP Mode Tables
8 381 T:Total PrtPGS
8 382 C:Total PrtPGS
8 383 F:Total PrtPGS
8 384 P:Total PrtPGS
8 385 S:Total PrtPGS
8 386 L:Total PrtPGS
8 387 O:Total PrtPGS
• When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is counted
as 2.
• When several documents are merged for a print job, the number of pages stored are counted for
the application that stored them.
• These counters are used primarily to calculate charges on use of the machine, so the following
pages are not counted as printed pages:
- Blank pages in a duplex printing job.
- Blank pages inserted as document covers, chapter title sheets, and slip sheets.
- Reports printed to confirm counts.
- All reports done in the service mode (service summaries, engine maintenance reports, etc.)
- Test prints for machine image adjustment.
- Error notification reports.
- Partially printed pages as the result of a copier jam.
8 391
350
*CTL
*CTL
*CTL
*CTL
*CTL
*CTL
*CTL
LSize PrtPGS
These SPs count pages printed on paper sizes A3/DLT and larger.
Note: In addition to being displayed in the SMC Report, these counters are also
displayed in the User Tools display on the copy machine.
These SPs count the number of pages printed by the
customer. The counter for the application used for
storing the pages increments.
[0 to 9999999/ 0 / 1]
The L: counter counts the number of pages stored
from within the document server mode screen at the
operation panel. Pages stored with the Store File
button from within the Copy mode screen go to the
C: counter.
*CTL [0 to 9999999/ 0 / 1]