Ricoh D143 Field Service Manual page 1261

F:FIN Jobs
These SPs total finishing methods for fax jobs only. The finishing method is specified
8 063
by the application.
Note: Finishing features for fax jobs are not available at this time.
P:FIN Jobs
8 064
These SPs total finishing methods for print jobs only. The finishing method is specified
by the application.
S:FIN Jobs
These SPs total finishing methods for scan jobs only. The finishing method is specified
8 065
by the application.
Note: Finishing features for scan jobs are not available at this time.
L:FIN Jobs
These SPs total finishing methods for jobs output from within the document server
8 066
mode screen at the operation panel. The finishing method is specified from the print
window within document server mode.
O:FIN Jobs
8 067
These SPs total finishing methods for jobs executed by an external application, over
the network. The finishing method is specified by the application.
8 06x 1 Sort
8 06x 2 Stack
8 06x 3 Staple
8 06x 4 Booklet
8 06x 5 Z-Fold
8 06x 6 Punch
8 06x 7 Other
*CTL
*CTL
*CTL
*CTL
*CTL
Number of jobs started in Sort mode. When a stored copy job is set for
Sort and then stored on the document server, the L: counter increments.
(See SP8-066-1)
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in staple mode,
the Staple counter also increments.
Number of jobs started In any mode other than the Booklet mode and set
for folding (Z-fold).
Number of jobs started in Punch mode. When Punch is set for a print job,
the P: counter increments. (See SP8-064-6.)
Reserved. Not used.
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
Main SP Tables-8
337