Information; Information 1 - Sanyo Projector Owner's Manual

Chapter 4 Controlling the Projector

Information

This page is to display the basic information of the projector status. Click
Information on the main menu.

Information 1

Items
Input ............................................Displays selected input and source.
System .......................................Displays selected signal system.
Signal ..........................................Input signal status (Yes, No)
Screen ........................................Displays screen mode.
PJ time(h) ................................. Displays the accumulated use time of the projector.
Lamp mode ............................Displays the current "Lamp mode".
Lamp control .........................Displays the current "Lamp control".
Lamp interval ........................Displays the current "Lamp interval".
Lamp status ............................. Displays the status of the 4 lamps with an icon. Refer to the table on page
Lamp Corres. Value(h) ..... Displays the use time (Corresponding value) of the 4 lamps.
* When PIP mode is active, displays Input, System, and Screen to "PIP mode".

Description
46.
Click this button to
update the information.