Setting 1 - Sanyo Projector Owner's Manual

Chapter 4 Controlling the Projector

Setting 1

Item Description
Language .............. Sets the language display of projector's
on-screen display menu.
Display .................... Switches on or off the on-screen menu
display on the screen. (ON, Countdown off,
OFF)
Countdown off ....... Displays input image instead the
Background ......... Sets the screen background when no sig-
nal input. (Blue, User, Black)
Lamp mode ......... Switches the lamp mode. {4-Lamps,
3-Lamps (Auto, Lamp1,2,3, Lamp2,3,4,
Lamp1,3,4, Lamp1,2,4), 2-Lamps (Auto,
Lamp1,4, Lamp2,3), Constant mode}
* Auto ...... Automatically selects 3 or 2
Constant mode ...... Sets the desired Target brightness
Lamp control ...... Selects lamp control mode. (Auto, Normal, Eco1, Eco2)
* When constant mode is selected in "Lamp mode", this function is disable.
Lamp life control ... Selects lamp life control mode (Mode1, Mode2) when the total use time exceeds
the recommended total hours of use.
Lamp interval ..... Sets the interval period of switching two lamps. (OFF, 24H, 200H, 500H, 1000H,
2000H)
* OFF ...... The lamp switching function is disable.
* When constant mode is selected in "Lamp mode", this function is disable.
HDMI setup ......... Sets the digital RGB image level according to the HDMI source. (Normal, Enhanced)
0
countdown during the startup.
lamps with shorter cumulative
use time.
(up to 1024) to keep the brightness
with modulating the lamp(s) or
switching the lamp mode.
The current brightness is shown in the Current box.