UNI-T LCR-1000 series Operation Manual page 7

The indicator lights on to show that the test result has passed.
10) FAIL indicator
The indicator lights on to show that the test result has failed.
11) [MENU]
Five soft keys are used to select parameters. The corresponding function of each soft key has been
displayed on its left (the right part of LCD). The function definition varies with different pages.
When the LCD display the <MEAS DISPLAY> page and the cursor key moves to <MEAS
DISPLAY>, press [MEAS] key to display the measurement results in full screen.
12) [SETUP]
Press this key to enter measurement parameter setup page.
13) [SYSTEM]
Press this key to Enter system setup page.
14) [FILE]
Press this key to enter file management page.
15) [TRIG]
When the trigger mode is set to MAN mode, press this key to trigger the LCR meter.
16) [ESC]
ESCAPE key.
17) [ ]
BACKSPACE key is used delete the last numeric of the input value.
18) [OK]
This key is used to end the input of data, and confirm and save the data displayed on the inputting
line.
19) Number keys
These keys are used to input data to the LCR meter. The key consists of numerical keys [0] to [9],
decimal point [.] and [+/-] key.