1. In one bus system, the connecting cable of each unit shall be less than 2 meters. Total cable length shall
be less than 20 meters.
2. Maximum 15 units can be connected to one bus.
3. There is no rule on how to connect cables. However, it is recommended to impose four back connectors
on one instrument.
Figt.5-3 Superimposition of two back connectors
Code
Function
SH1
Data source contact
Fig.5-2 GPIB Connector and Pinout
Connector's function:
Description
Three line connection
Figt.5-4 Superimposition of four back connectors