UNI-T LCR-1000 series Operation Manual page 12

Parameter area
In parameter area, the test parameter and its value are displayed.
Font size of the parameters can be set as small size of large size by pressing [FONT] softkey.
Parameter value display can be turn on or off by pressing [DISP] softkey.
Deviation can be set as OFF, ABS or % by pressing [DEV] softkey.
FUNC : Cp-D
FREQ : 1 kHz
LEVEL : 1.00V
／ Cp : -0.0015p
D : 0.3697
Vm:OFF
Use softkeys to select
Parameter area
In parameter area, the test parameter and its value are displayed.
Font size of the parameters can be set as small size of large size by pressing [FONT] softkey.
Parameter value display can be turn on or off by pressing [DISP] softkey.
Deviation can be set as OFF, ABS or % by pressing [DEV] softkey.
FUNC : Cp-D
FREQ : 1 kHz
LEVEL : 1.00V
／ Cp : -0.0015p
D : 0.3697
Vm:OFF
Use softkeys to select
< MEAS DISP >
RANGE : AUTO
SPEED : SLOW
COMP : OFF
Im:OFF
< MEAS DISP >
RANGE : AUTO
SPEED : SLOW
COMP : OFF
Im:OFF
FONT
SMALL
DISP
OFF
F
DEV
OFF
FONT
SMALL
DISP
OFF
F
DEV
OFF