UNI-T LCR-1000 series Operation Manual page 17

are needed in the next measurement, user can easily upload parameter settings from the internal non-volatile
memory. No need to make settings again.
Press [File] key, the <Files List> page will be displayed. Press [File] key again to switch between internal and
external files lists.
< INTER Files List >
I:\
NO File
1
2
3
4
5
6
7
Use softkeys to select
I:\
File/Folder
Press /
Use softkeys to select
Operation steps:
1. Read existing files
1) Use ▲ and ▼ keys to choose files. Or Input numbers to choose corresponding file, and then press
[OK] key to confirm.
2) Use ◄ and ► keys o choose pages.
2. Save parameter to files
1) Move cursor to file number. Press [STORE] softkey to save parameter to the selected file.
2) Press [YES] softkey to continue, or press [NO] softkey to cancel operation.
3) If press [YES] softkey in step 2, input file name via numeric keys and then press [OK] to confirm. If the
file name already exists, press [Continue] softkey to cover the existing file of press [ESC] to cancel
operation.
3. Upload parameters from existing files
1) Press [File] key to switch to internal or external files list.
< EXT Files List >
to page, FILE to change I/E !
LOAD
Page: 1
STORE
DEL
FIND
COPY TO
E:
LOAD
Page: 1
STORE
DEL
PARENT
DIR
COPY TO
I: