UNI-T LCR-1000 series Operation Manual page 10

Range mode (not available for LCR-1010)
There are four range modes to choose from: Auto, Hold, Increase +, Decrease -
FUNC : Cp-D
FREQ : 1 kHz
LEVEL : 1.00V
／ Cp : -0.0015p
D : 0.3697
Vm:OFF
Use softkeys to select
Test frequency
Different models have different test frequency points. Press increase or decrease key to choose the last or the
next frequency points.
LCR-1010: 100Hz,120Hz,1kHz,10kHz
LCR-1030: 100Hz,120Hz,1kHz,10kHz, 20kHz, 30kHz
LCR-1200: 40Hz, 50Hz, 60Hz, 75Hz, 100Hz, 120Hz, 150Hz, 200Hz, 250Hz, 300Hz, 400Hz, 500Hz, 600Hz,
750Hz, 800Hz, 1kHz, 1.5kHz, 2kHz, 2.5kHz, 3kHz, 4kHz, 5kHz, 6kHz, 7.5kHz, 10kHz, 12kHz,
15kHz, 15.7kHz, 16.2kHz, 20kHz, 25kHz, 30kHz, 40kHz, 50kHz, 60kHz, 66.6kHz, 75kHz, 100kHz,
120kHz, 150kHz, 200kHz (38 points)
FUNC : Cp-D
FREQ : 1 kHz
LEVEL : 1.00V
／ Cp : -0.0015p
D : 0.3697
Vm:OFF
Use softkeys to select
Speed
Speed can be set at fast, medium or slow.
When test frequency ≥1kHz:
Fast: max.30 times/second
Medium: 10 times/second
Slow: 3 times/second
< MEAS DISP >
RANGE : AUTO
SPEED : SLOW
COMP : OFF
Im:OFF
< MEAS DISP >
RANGE : AUTO
SPEED : SLOW
COMP : OFF
Im:OFF
AUTO
HOLD
F
INCR +
DECR _
INCR + +
INCR +
F
INCR +
DECR -
DECR - -