Sanyo PLC-WXU300K Owner's Manual page 32

Computer Input
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press
the Point or the SELECT button. Move the highlight to the
►
Mode that you want to clear and then press the SELECT
button.
Store
To store the adjusted data, select Store and then press the
Point or the SELECT button. Move the highlight to one of
►
the Modes 1 to 5 in which you want to store, and then press
the SELECT button.
Note:
• Display area (H/V) cannot be selected when 480i, 575i,
480p, 575p, 70p, 1035i, or 1080i is selected in the PC
System Menu (p.29).
• When input computer signal to the projector, PC adjust
will become available.
3
Mode free
Values of Total dots, Horizontal,
Vertical, Display area H, and
Display area V.
Store
Store
Press MENU button
to close this dialog
box.
This Mode has stored
parameters.
Vacant
store
Press SELECT button to
store adjusted data