Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Terminal Unit
ASSEMBLING
Assemble Terminal unit to Charger case cover as described in Fig. 3.
Fig. 3
1. Slide Compression spring 4 (233194-8) over the pin of
Charger case cover until it stops against the rib.
Compression
spring 4
(233194-8)
[3]-3. Terminal Cover
DISASSEMBLING
Disassemble Terminal cover as described in Fig. 4.
Fig. 4
By unscrewing PT3x10 Tapping screw,
Terminal cover can be removed from Charger case
Note: Be careful not to lose Compression spring 4.
Terminal cover
Charger case
PT3x10 Tapping screw
pin
rib
Charger case cover
Compression spring 4
(231474-6/ 2 pcs)
2. Insert three legs of Terminal unit into the
corresponding bosses of Charger case cover.
Then connect Connectors 1 and 2 of Terminal
unit securely to Charging circuit as illustrated
on left in Fig. 2.
Terminal unit
Connector 1
P 3/ 5
Connector 2
Advertisement
