Advertisement
R
epair
CAUTION: Disconnect the machine for safety before repair/ maintenance in accordance
with the instruction manual!
[3] DISASSEMBLY/ASSEMBLY
Note:
Be careful not to confuse the following two Compression springs because they are not interchangeable:
Compression spring 4 (233194-8) assembled to Charger case cover
Compression spring 4 (231474-6) assembled to Terminal cover
[3]-1. Charger Case Set
DISASSEMBLING
Remove Charger case from Charger case cover as described in Fig. 1.
Fig. 1
1. Remove Cap 13 (4 pcs.) from Charger case cover.
Note: Be careful not to lose removed Cap 13.
Cap 13 (4 pcs)
[3]-2. Terminal Unit
DISASSEMBLING
Remove Terminal unit from Charger case cover as described in Fig. 2.
Fig. 2
1. Disconnect Connector 1 and Connector 2
from Charging circuit.
Connector 1
Connector 2
Charger case
Charger case cover
Charging circuit
2. Remove Charger case from Charger case cover
by unscrewing four BT4x20 Tapping screws.
BT4x20 Tapping screw (4 pcs.)
2. Remove Terminal unit and Compression spring 4
(233194-8).
Compression
spring 4
(233194-8)
P 2/ 5
Terminal unit
Advertisement
