Remote Control - Sanyo PJ LINK PLC-XU106K Owner's Manual

Part Names and Functions

Remote Control

②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
Note:
To ensure safe operation, please
observe the following precautions:
– Do not bend, drop, or expose the
remote control to moisture or heat.
– For cleaning, use a soft dry cloth. Do
not apply benzene, thinner, spray, or
any chemical material.
1
① ON/STAND-By button
② AUTO SET button
① ③ COMPUTER 1/ buttons
④ VIDEO button
⑤ S-VIDEO button
⑳
⑲
⑥ Point ▲▼◄► buttons
⑱
⑦ SCREEN button
⑰
⑧ MENU button
⑯
⑮
⑭
⑨ FREEZE button
⑬
⑩ NO SHOw button
⑪ D .ZOOM ▲▼ buttons
⑫ VOLUME +/- buttons
⑬ MUTE button
⑭ IMAGE button
⑮ P-TIMER button
⑯ LAMP button
⑰ INFO . button
⑱ KEySTONE button
⑲ SELECT button
⑳ COMPONENT button
Turn the projector on or off. (pp.19-21)
Execute the setting of Auto setup (includes Input search
function, Auto PC adj. function and Auto Keystone function).
(pp.24, 47)
Select the COMPUTER 1 or COMPUTER 2 input source.
(pp.29-30, 40)
Select the VIDEO input source. (p.39)
Select the S-VIDEO input source. (p.39)
– Select an item or adjust the value in the On-Screen Menu.
(p.22)
– Pan the image in the Digital zoom +/- mode. (p.38)
Select a screen mode. (pp.28, 37-38, 45)
Open or close the On-Screen Menu. (p.22)
Freeze the picture on the screen. (p.27)
Temporarily turn off the image on the screen. (p.28)
Zoom in and out the images. (pp.27, 38)
Adjust the volume level. (p.26)
Mute the sound. (p.26)
Select the image mode. (pp.28, 35, 42)
Operate the P-timer function. (p.28)
Select a lamp mode. (pp.27, 54)
Operate the information function. (p.59)
Correct Standard (for Vertical/Horizontal adjustment) or Corner
keystone distortion (pp.25, 48).
– Execute the selected item. (p.22)
– Expand or compress the image in Digital zoom mode. (p.38)
Select the COMPONENT input source. (p.40)