Table of Contents
Advertisement
Menu Bar
For detailed functions of each menu, see "Menu Tree" on pages 69-70.
Main Menu
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
①
Input
Used to select an input source from Computer 1, Computer , Video or S-video.
②
PC adjust
Select Auto PC adj ., Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V to adjust
the parameters to match with the PC input signal format. (pp.32-34)
③
Image select
For computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green),
Colorboard and image 1 - 4. (p.35)
For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green), Colorboard
and Image 1- 4. (p.42)
④
Image adjust
For computer source, used to adjust computer image [Contrast, Brightness, Color temp ., white balance (R/G/B),
Sharpness and Gamma]. (pp.36-37)
For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp ., white balance (R/G/
B), Sharpness, Gamma, Noise reduction and Progressive]. (pp.43-44)
⑤
Screen
For computer source, used to adjust size of the image [ Normal, True, wide, Full, Custom and Digital zoom +/– ].
(pp.37-38)
For Video source, used to set size of image [Normal, wide and Custom]. (p.45)
⑥
Sound
Used to adjust the volume or mute the sound. (p.26)
⑦
Setting
Used to set the projector's operating configurations. (pp.46-58)
⑧
Information
Display the input source information: Input , H-sync freq ., V-sync freq ., Screen, Language, Lamp status, Lamp
counter, Power management, Key lock, PIN code lock and Remote control . (p.59)
⑨
Network
See owner's manual of "Network Set-up and Operation".
⑩
Guide
The key operation is displayed.
Sub-Menu
(pp.29-30,39-40)
Basic Operation
3
Advertisement
Table of Contents
