Adjusting Hand And Day Indicator Alignment; Phone Finder - Casio 5526 Operation Manual

Configuring the Summer Time Setting
●
1.
Y Tap the "MR-G Connected" icon.
2.
X Hold down the (C) button for about 3.5
seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3. Y Perform the operation shown on the
phone screen to configure the summer
time setting.
[Auto]
●
The watch switches between standard
time and summer time automatically.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
Note
While the summer time setting is
●
[Auto], the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you
are in an area that does not observe
summer time, you can leave the
watch's summer time setting as
[Auto].
Changing the time setting manually
●
with a watch operation will cancel
auto standard time/summer time
switching.
A MR-G Connected screen shows
●
information about summer time
periods.
Operation Guide 5526
Swapping Your World Time and Home
●
Time
1.
Y Tap the "MR-G Connected" icon.
2.
X Hold down the (C) button for about 3.5
seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
3. Y Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
For example, if your Home City is Tokyo
and the World Time City is New York, they
will be swapped as shown below.
The second hand will point to the time
●
zone of the currently selected World
Time City for a few seconds after you
swap times.
Before swapping
Home City (Tokyo)
World Time City
(New York)
Note
Auto time adjustment does not work
●
for 24 hours after swapping of the
Home Time and World Time.
If the hands and/or day indicator are out of
alignment even though auto time adjustment
is being performed, use MR-G Connected to
adjust them.
1.
2.
3.
After swapping
Home City (New York)
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in the
manner mode.
World Time City (Tokyo)
1.
Adjusting Hand and Day
Indicator Alignment
Y Tap the "MR-G Connected" icon.
X Hold down the (C) button for about 3.5
seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
Y Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.

Phone Finder

Important!
Do not use this function in areas
●
where phone call tones are
restricted.
The tone sounds at a high volume.
●
Do not use this function when
listening to phone output over
earphones.
X If the watch is connected with a phone,
press any button to terminate the
connection.
Connected After disconnection
9