Time Adjustment (Time Calibration Signal); Appropriate Signal Reception Location; Time Calibration Signal Reception Ranges - Casio 5526 Operation Manual

Time Adjustment (Time
Calibration Signal)
The watch's time and day settings can be
configured in accordance with a received time
calibration signal.
Important!
In order to make it possible for the
●
current time setting to be adjusted
correctly based on time calibration
signal reception, you need to specify
the time zone where you are using
the watch.
However, if the watch was unable to
●
connect with a phone even once for
time adjustment during the previous
day while connection with a phone is
being used, it will automatically try to
receive a time calibration signal.
Disable auto time adjustment
●
whenever you are inside an aircraft
or in any other area where radio
wave reception is prohibited or
restricted.
Using MR-G Connected to
l
Configure Settings
Using Watch Operations to
l
Configure Settings
Note
Areas where time calibration signal
●
reception is supported are limited.
When the watch in an area where
time calibration signal reception is
not possible, connect with a phone
to adjust time and day settings.
Time Calibration Signal Reception
l
Ranges
If the watch does not indicate the
●
correct time even after it receives a
time calibration signal, correct the
hand and day indicator positions.
Using MR-G Connected to Make
l
Adjustments
Using Watch Operations to Make
l
Adjustments
Operation Guide 5526
Appropriate Signal
Reception Location
A time calibration signal can be received while
the watch is near a window.
Keep metal objects away from the watch.
●
Do not move the watch.
●
Do not perform any operation on the watch.
●
6 o'clock position
Note
You may experience time calibration
●
signal reception problems in the
areas described below.
Among or near buildings
—
While riding in a vehicle
—
Near household appliances,
—
office machines, mobile phones,
etc.
On a construction site, in an
—
airport, or any other location
where radio wave interference
occurs
Near high-voltage lines
—
In mountainous areas or behind a
—
mountain
Time Calibration Signal
Reception Ranges
Time calibration signal reception is supported
in the areas shown below.
Japan Time Calibration Signal (JJY)
●
500 kilometers
Fukuoka/
Saga
500 kilometers
Tokyo
1,000 kilometers
Chinese Time Calibration Signal (BPC)
●
1,500 kilometers Changchun
500 kilometers
Chengdu
Shangqiu
U.S. Time Calibration Signal (WWVB)
●
600 miles
(1,000 kilometers)
Denver
Los Angeles
Fort Collins
2,000 miles (3,000 kilometers)
U.K. (MSF) and German (DCF77) Time
●
Calibration Signal
Anthorn
500 kilometers
The Anthorn signal is receivable within this area.
Note
Even if you are within the normal
●
reception range of a time calibration
signal, reception may be made
impossible by the following factors:
geographic contours, weather, the
season, the time of day, wireless
noise.
1,000 kilometers
Fukushima
Beijing
Shanghai
Hong Kong
New York
Chicago
1,500 kilometers
Mainflingen
6