Options
8.1
Door mounting kit
Door mounting kit
To allow the IOP-2 to be mounted into the door of a cabinet, the door mounting kit (DMK)
has been designed. This will allow the IOP-2 to be fitted to the front of a panel or door and
be IP54 rated.
The fitting of the DMK is accomplished as shown in the figure below.
Prior to the installation of the DMK, it is necessary to create a hole in the panel or cabinet
with the dimensions as shown in the figure below:
Figure 8-1
Installation of Door mounting kit
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 04/2017, FW V2.0, A5E39549448B AA
8
63