7
COMMUNICATION EXAMPLES
7.1
Communication Examples of Ethernet
This section describes the socket communications examples using Active open of TCP/IP communications.
System configuration example
The following system configuration is used to explain socket communications.
System configuration
GX Works3
(1) Sending side (IP address: 192.0.1.100)
(2) Receiving side (IP address: 192.0.1.101)
Sending side
Connect the engineering tool to the CPU module on the sending side and set the parameters.
1.
Set the CPU module as follows.
[Project] [New]
2.
Click the [OK] button to add the module labels of the CPU module.
(1)
Ethernet
(2)
7 COMMUNICATION EXAMPLES
7.1 Communication Examples of Ethernet
7
69