Network Used And Led Indication - Mitsubishi Electric MELSEC iQ-R Series User Manual

Network used and LED indication

LED indication of the RnENCPU differs depending on the network used. For the LED indication when each network is used,
refer to the following.
• When Ethernet is used: Page 19 When Ethernet or Q-compatible Ethernet is used
• When CC-Link IE Controller Network is used: Page 20 When CC-Link IE Controller Network is used
• When CC-Link IE Field Network is used: Page 21 When CC-Link IE Field Network is used
Dot matrix LED indication
The following table lists the station number indicated on the dot matrix LED.
Network combination Setting in GX Works3
Model
CC-Link IE Controller Network _RJ71EN71 (CCIEC)
only
CC-Link IE Field Network only _RJ71EN71 (CCIEF)
Ethernet + CC-Link IE _RJ71EN71 (E+IEC)
Controller Network
Ethernet + CC-Link IE Field _RJ71EN71 (E+IEF)
Network
In offline mode
At major error
*1 The name in parentheses is the abbreviation of the network type.
*1
Port 1 network type
CC-Link IE Control
CC-Link IE Field
Ethernet
Ethernet
Display
Port 2 network type
CC-Link IE Control Displays the current station number of CC-
Link IE Controller Network.
Station number not set: "  "
Control station, normal station: 1 to 120
CC-Link IE Field Displays the current station number of CC-
Link IE Field Network.
Station number not set: "  "
Master station: 0
Submaster station, local station: 1 to 120
CC-Link IE Control Displays the current station number of CC-
Link IE Controller Network.
Station number not set: "  "
Control station, normal station: 1 to 120
CC-Link IE Field Displays the current station number of CC-
Link IE Field Network.
Station number not set: "  "
Master station: 0
Submaster station, local station: 1 to 120
Displays "" in offline mode.
Undefined
1
1 PART NAMES
25
1.2 CPU Module