How To Attach The Stand; How To Remove The Stand - Sanyo DP19241 Owner's Manual

How to attach the stand

NOTE:
• Unplug the AC cord from the AC INPUT terminal.
• Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid
any damage to the unit.
• Do not touch or press the TV-screen, glass might break under pressure.
1. Place the TV on its back onto a table.
Align the stand's bottom-plate (supplied) as seen here.
It will fit in only one direction.
Hold the unit and attach the stand slowly.
2. Finally secure the bottom-plate with 2 screws (supplied).
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

How to remove the stand

When you transport this product, remove the stand and pack fl at against the back of the unit in the carton. To
remove the stand, perform the step below.
1. Place the TV on its back onto a table.
Remove 2 screws with the bottom-plate.
For wall mounting, the base must be removed. To disconnect the base/stand remove the three (3) screws from
the back (see page 7).
8
3FR0321A_En.indd 8 3FR0321A_En.indd 8
LCD PANEL SIDE
2. Pull the stand toward you again and remove the
stand from the TV.
1/7/11 4:32:01 PM 1/7/11 4:32:01 PM