Stand Assembly; Attaching The Base - Sanyo FW55C46F Owner's Manual

Stand Assembly

(FW55C46F)
M4 x 0.472" (12mm)
M5 x 0.472" (12mm)

Attaching the Base

You must attach the base to the Unit to have it as a table top Unit.
Be sure the front and rear of the base match the proper direction. For
large screen TVs, at least 2 people are required for these steps.
(FW55C46F)
1
2
× 4
× 2
4
×
M4 x 0.472" (12mm)
(FW43C46F)
1
2
1
2
3
×
M4 x 0.787" (20mm)
Note(s)
Make sure to use a table which can support the weight of this Unit and is larger than this
●
Unit.
Make sure the table is in a stable location.
●
When attaching the base, ensure that All Screws are tightly fastened. If the base is not
●
properly attached, it could cause the Unit to fall, resulting in injuries as well as damage to
the Unit.
To remove the base from this Unit, unscrew the Phillips head screws by reversing the
●
procedure. Be careful not to drop the base when you remove it.
9 .
English
Continued on next page.