Sanyo DP15657 Owner's Manual

CONNECTING A VCR OR DVD TO THE DTV
VIDEO1 (ANALOG) JACKS
1 Connect a Composite cable to the VIDEO1
Yellow, White, and Red AV jacks.
2 2 OPTIONAL
Connect DVD to the TV S-Video In Jack, if avail-
able on your external equipment.
Note: S-Video jack connection overrides Video jack
connection (VIDEO1).
3 Press INPUT to select Video1 to view the VCR or
DVD program.
IMPORTANT FACTS:
Don't be fooled by the phrase
"Available in High-Definition."
Composite jacks offer only 480i
(SDTV) resolution.
3
To view available High-Definition
(HD) programs, you must connect
your HD equipment to the
Component jacks.
CONNECTING A MULTICHAN-
NEL RECEIVER TO THE DTV
DIGITAL AUDIO OUT JACK
1 Connect a Multichannel Receiver to the TV Digital
Audio Output as shown.
®
Note: Dolby Digital 5.1 audio is available at the Digital
Audio Output only when received as part of a
Digital Antenna signal.
Multichannel Receiver
Back View of TV
1
Coaxial Cable

REMOTE CONTROL OPERATION

Point
towards TV
Œ

•
Ž


11

12
13
‘
14
’
“
”
Œ
Input Key—Press to select the program source
to watch: TV, Video 1, Video 2, or Video 3.

Volume Keys—Press VOL – + to adjust.
Ž
Number Keys—Press two keys to select a chan-
nel. Example: Press 0 then 6 to select channel
6. (See #13.)

Channel Scanning (CH L M ) Keys—Press to
scan through the channels in memory.

Menu Navigational Keys:
Menu—Press to display on-screen menu.
Cursor L (up) M (down) keys—Press these
keys to move the cursor up and down within
the menu.
Cursor < (left) > (right) keys—Press these keys
to move the cursor left and right within the
menu.
DTV AV Input Jacks
2 2
S-Video
Jack
(Optional)
1
Composite
AV
Remote Control
Jack
VCR or DVD
CONNECTING A STEREO
AMPLIFIER TO THE DTV
AUDIO OUT (ANALOG) JACKS
1 Connect a Stereo Amplifier to the TV
Audio Out jacks as shown.
Do not connect external speakers
Note:
directly to the DTV.
1
Back View of TV
Stereo
Amplifier
If you experience
problems, please call
1-800-877-5032,
We Can Help!
Enter Key—Press to select an option from the
menu system, when required.
Exit Key—Press to exit from the menu system.
‘
PIX Shape Key—Use to change the video display
format. Available options depend on signal
received and the broadcast's aspect ratio. Note:
Cannot display picture on a full screen. Check
Aspect Ratio of broadcast. Then press PIX Shape
key to change setting.
’
Reset Key—Press this key twice to restore factory
settings. The TV will automatically start Channel
Search and clear all customized settings. Note:
Channel scan memory database list of digital
and analog channels will be replaced. If desired,
personal settings can be made again using the
menu options.
“
Audio Key—Press to select the desired audio
mode (if available).
”
Caption Key—Captioning is text information
transmitted along with the picture and sound so
it can be displayed on the TV screen.
Press CAPTION to select mode options: Digital
CC1 ~ CC6, or Analog CC1 ~ CC4, OFF, or
QuikCap. (QuikCap switches captions on and off
with the Mute function.) Digital Captions can be
changed using the menu settings.
•
Mute Key—Press once to mute the sound.
11 Recall Key—Press to switch between the last
two channels selected.
12 Sleep Key—Press this key then the "0" key to set
the Sleep Off Timer. Time can be set in 30-minute
increments up to 3 hours.
Note:The Sleep Timer
cancels when the TV is turned off or if a power failure
occurs.
1– – Key—For Analog Cable channels above 100,
13
press this key, then press the other two numbers.
Info Key—Press to display the Digital and Analog
14
Full Banner information. The banner contains the
following: program title, station ID, program rat-
ing, signal strength, channel number, tuner ID,
and audio information.
ENGLISH
LCD Owner's Manual
1JC6P1P0291 – –
Part No.:
Please call us at
1.800.877.5032
if you need
assistance with your new HDTV.
We can Help!
FIRST-THINGS-FIRST
1 Install batteries in remote control (2AA, not included)
PRECAUTIONS
To ensure safe operation, please observe the following
precautions:
R eplace both batteries at the same time. Do not use a new
battery with a used battery.
Risk of explosion, if battery is replaced by an incorrect type.
heat.
Do not expose the Remote Control Unit to moisture or
2 Connect Signal to the TV's Integrated Analog / Digital
75 ohm Antenna Input terminal
RF ANTENNA
CABLE
OR
OR
CABLE BOX or SATELLITE BOX
3 Plug in AC power cord (120V AC, 60 Hz.)
4 Press the POWER key.
(Follow on-screen instructions)
5 Perform "All Channel Search."
The All Channel
Search will search for off-air digital and analog
channels, and analog cable channels. The DTV will
receive cable or off-air channels, but not at the
same time. If after two searches the DTV still fails
to detect any channels, the DTV will tune to
Video1.
Note: If EXIT is pressed,
the DTV will skip Channel
Search and tune to Video1
without storing any chan-
nels in the Channel Map
database.
Trademarks Information:
Manufactured under license from Dolby Laboratories.
"Dolby" is a trademark of Dolby Laboratories.
CONNECTING A DVD OR
GAME TO THE DTV
VIDEO 2 / 3 (COMPONENT VIDEO IN
JACKS)
1 Connect a Component cable to the VIDEO2 / 3
Green, Blue, and Red video jacks.
2 Connect an Audio Cable to the VIDEO2 / 3
White and Red audio jacks.
3 Press INPUT to select Video2 or Video3 to
view the program.
Note: VIDEO2 and VIDEO3 jacks have identical
functions. Compatible video devices can be
connected to either or both jacks.
OPERATING TIP:
Remote Control
You DO NOT need to tune the TV
to Channel 3 or 4 to view DVD
program.
3
AS
Model Nos.
DP15657
DP19657
Visit us at www.sanyoctv.com
for more information about these models.
(REQUIRED INITIAL SETUP)
The Tuner in this DTV can receive:
1. Digital and /or Analog Off-Air
Signals from an RF antenna.
OR
2. Analog or ClearQAM cable chan-
nels.
Note: You must search for ClearQAM
channels using the "Digital
Cable Search" menu option.
Analog/ Digital
OR
3. The output from a VCR or cable
Antenna In
box.
Digital signals from a Set-Top Box
(STB) should be received through
the Component In jacks.
This DTV can receive ANY unscram-
bled RF signal being broadcast.
Initial on-screen
ALL Channel Search
ALL Channel Search [Analog & Digital]
«
Specifications
Power Requirement: Source: AC 120V, 60Hz
Power Consumption: DP15657: 40 watts
DP19657: 50 watts
DVD Player or similar digital
device, such as a Satellite Receiver
Y- Pb- Pr
Component
Jacks
1
2
Audio L/R Jac
k
Game console
Y- Pb- Pr
Component
Jacks
1
2
Audio L/R
Jac
k
DTV