Initial Settings; Setting Language - Sanyo DVD-SL25 Instruction Manual

Once the initial settings have been completed, the unit can
always be operated under the same conditions.
The settings will be retained in the memory until they are changed,
even if the power is turned off.

Setting Language

1. Press [SETUP] in the stop mode.
The setup screen appears.
"Language" is highlighted.
Language Display
2. Press [ENT].
"Language" screen appears.
3. Press [p] or [o] to select the item (highlighted).
Example:
Language Display
OSD English
Audio Disc
Subtitle Disc
DVD Menu Disc
4. Press [ENT].
The submenu appears.
Example:
Language Display
OSD English
Audio Disc
Subtitle Disc
DVD Menu Disc
5. Press [p] or [o] to select the language (highlighted).
6. Press [ENT].
The selected language remains.
7. Repeat steps 3 ~ 6 for other items.
Note:
If "Others" is selected, enter the language code. (See
"LANGUAGE CODE LIST" on page E31.)
8. Press [o] to skip back to the setup screen (or press [SETUP]).

INITIAL SETTINGS

Digital Out Parental
Digital Out Parental
Digital Out Parental
English
Español
Français
Deutsch
Portugues
Notes:
• In this instruction manual, the language in on-screen
display is English.
If you change the language, please follow the selected
language in on-screen display.
• You cannot switch audio sound track languages if there is
only one language recorded on the disc.
• When you play back a DVD video disc, the unit automatically
displays the pre-selected subtitle language if it is included
on the disc.
• If "Others" is selected, enter the language code. (See
"LANGUAGE CODE LIST" on page E31.)
• For improvement, on-screen displays subject to change
without notice.
SETUP
ENT
-E27-
PICTURE
z /ON
LAST MEMO OPEN/CLOSE
MODE
PROGRAM
SURROUND REPEAT A-B REPEAT
/RANDOM
ANGLE
ON SCREEN ZOOM ANGLE
REPLAY
SUBTITLE
SETUP MENU
CHANGE o
4
SUBTITLE
ON/OFF
b a
ENT
AUDIO TOP MENU RETURN
p
5
REV SLOW FWD SLOW
PAUSE/STEP
PREV NEXT
PLAY
REV FWD
CLEAR
1 2 3 C
4 5 6 0
SEARCH
MODE
7 8 9