Before Connection; Choosing A Connection - Sanyo DVD-SL25 Instruction Manual

IMPORTANT INFORMATION:
• To connect this unit to a TV, TV must have a set of Audio/Video composite input jacks (RCA-type).
You cannot use an antenna terminal to connect this unit.
• If your TV has only an antenna terminal, please purchase the TV with Audio/Video input jacks or the RF modulator.
• Do not connect the unit to a VCR directly. The playback picture will be distorted because DVD video discs are copy-
protected.
• Please refer to the instruction manuals for the components that you are connecting (TV, AV amplifier, etc.).

Choosing a Connection

Does your TV have "Audio/Video input jacks"?
Yes No Do you use an RF Modulator (not supplied)?
x
x
TV Connection
x
TV and Amplifier Connection
x
x
VIDEO Connection
AUDIO
x
Connection
x

BEFORE CONNECTION

No
x x
Do you connect it to a Conventional
TV?
No
Do you connect it to a TV with
Progressive-scan Capability?
x x x x x
Do you connect it to an Amplifier
with Dolby Digital Decoder, DTS
Decoder or MPEG2 Decoder?
No
Do you connect it to a Digital
Amplifier?
No
Do you connect it to an Amplifier
with Dolby Pro Logic Decoder?
No
See "Connecting to an Audio
System and TV (Example 3)" on
page E9.
Yes
x x
Please purchase the TV with Audio/Video input jacks or
x x
the RF Modulator.
Yes
x x
Yes
x x
x x x x x
Yes
x x
Yes
x x
Yes
x x
-E5-
See "Connecting to a Conventional TV
(Example 1)" and "Using RF Modulator"
on pages E6 & E7.
See "Connecting to a Conventional TV
(Example 1)" on page E6.
See "Connecting to a TV with
Progressive-scan Capability (Example
2)" on page E8.
See "Connecting to a Conventional TV
(Example 1)" on page E6 or "Connecting
to a TV with Progressive-scan Capability
(Example 2)" on page E8.
See "Connecting to an Amplifier with
Dolby Digital Decoder, DTS Decoder or
MPEG2 Decoder (Example 4)" on page
E10.
See "Connecting to a Digital Amplifier
(Example 5)" on page E10.
See "Connecting to an Amplifier with
Dolby Pro Logic Decoder (Example 6)"
on page E11.