Sanyo DVD-SL25 Instruction Manual page 8

Using RF Modulator
If your TV does not have a Video input jack and has an antenna
terminal only, please purchase the *RF Modulator (not supplied).
(*Please consult your audio/video dealer.)
Example: DVD video player, TV and RF Modulator connections
To AUDIO
OUT jacks
COMPONENT VIDEO OUT
Y P P
B R
VIDEO OUT
SELECT
S
R L
S-VIDEO OUT
COMPONENT
AUDIO OUT VIDEO OUT
DVD video player
1. Connect the antenna cable (not supplied) to the ANT. IN
terminal of the RF Modulator.
2. Connect the 75-ohm coaxial cable (not supplied) between
the TO TV terminal of the RF Modulator and the VHF/UHF
ANTENNA IN terminal of the TV.
3. Connect the Audio/Video cable (supplied) between the
AUDIO OUT and VIDEO OUT jacks of the DVD video
player and the AUDIO INPUT and VIDEO INPUT jacks of
the RF Modulator.
Example: DVD video player, VCR, TV and RF Modulator connections
To AUDIO
OUT jacks
COMPONENT VIDEO OUT
Y P P
B R
VIDEO OUT
SELECT
S
R L
S-VIDEO OUT
COMPONENT SUBWOOFER
OUT
AUDIO OUT VIDEO OUT
DVD video player
1. Connect the antenna cable (not supplied) to the VHF/UHF
FROM ANT IN terminal of the VCR.
2. Connect the 75-ohm coaxial cable (not supplied) between
the TO TV OUT terminal of the VCR and the ANT. IN
terminal of the RF Modulator.
3. Connect the 75-ohm coaxial cable (not supplied) between
the TO TV terminal of the RF Modulator and the VHF/UHF
ANTENNA IN terminal of the TV.
Audio/Video cable (supplied)
3
To AC 120V,
60Hz
RF Modulator
Audio/Video cable (supplied)
4
To AC 120V,
60Hz
RF Modulator
VHF/UHF
ANTENNA
TV
To audio input
jacks
A/V INPUT JACKS
TO TV
CHANNEL
VIDEO R-AUDIO-L 3 4
4
2
4. Turn on the TV, and set the channel number (CHANNEL3 or
CHANNEL4) on both TV and RF Modulator, whichever is not
used for regular broadcasts in your area.
Note:
For more details, please refer to the instruction manual of the RF
Modulator.
To audio input
jacks
A/V INPUT JACKS
TO TV
CHANNEL
VIDEO R-AUDIO-L 3 4
5
IN
3
4. Connect the Audio/Video cable (supplied) between the
AUDIO OUT and VIDEO OUT jacks of the DVD video player
and the AUDIO INPUT and VIDEO INPUT jacks of the RF
Modulator.
5. Turn on the TV, and set the channel number (CHANNEL3 or
CHANNEL4) on all TV, VCR and RF Modulator, whichever
is not used for regular broadcasts in your area.
Note:
For more details, please refer to the instruction manual of the RF
Modulator.
-E7-
1
ANT. IN
VHF/UHF
ANTENNA
IN
1
2
FROM ANT.
ANT. IN
3 4
5
CHANNEL
VCR
TV
VHF/UHF
IN
TO TV
OUT