Resetting The Tv; Using The Audio Output Jacks - Sanyo AVM-3651G Owner's Manual

QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors; for right
RED
audio and for
WHITE
left audio.
Position your TV at
least 2 feet from
stereo speakers.
The magnets in the
speakers may affect
the picture quality.
Do not connect
external speakers
directly to the TV.
12
RESET TING THE TV
Press the RESET key to automatically reset the television to factory settings. These features
will automatically reset:
• Picture/Sound Adjustments: Color, Tint, Contrast,
Brightness, Sharpness, Color Enhancer, Bass, and Treble
• Channel Memory
• Audio to Stereo
• Initial Channel to OFF
• Caption to OFF
• V-Guide to OFF
• TV Speakers to ON
• Audio Output to FIXED
• Language to English
• Auto Clock and Sleep Timer (if previously set)
If desired, personal settings can be made again
using the menu options.

USING THE AUDIO OUTPUT JACKS

CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS
1. Connect the TV Audio Output (R/L)
2. Press POWER to turn on the TV. Turn on external equipment also.
3. Use the AUDIO OUTPUT on-screen menu options (see page 11) to select Fixed or
Variable output signal.
Notes: When TV Speakers is in the ON mode, sound will be produced through your TV and
external speakers.
When TV Speakers is in the OFF mode, sound will be produced only through the
external speakers.
Stereo Amplifier
Press RESET key
again to return
factory preset and
begin channel search
Auto Clock was cleared
Begin setup procedures?
NO
Use –/+ keys to select
Then press the MENU Key
to the Stereo Amplifier In (R/L)
AUDIO AUDIO
AUDIO VIDEO INPUT AUDIO VIDEO INPUT
OUTPUT OUTPUT
AV2 AV2 AV1 AV1
VIDEO VIDEO
(MON0)
L
L L
AUDIO AUDIO
(MON0)
R
R R
Back of TV
YES
.
UHF/VHF/CATV
75Ω
S-VIDEO S-VIDEO
INPUT INPUT
AV1 AV1
AV2 AV2