Using The Audio/Video Input Jacks - Sanyo AVM-3280G, AVM-3680G Owner's Manual

QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors; for right
RED
audio, for left
WHITE
audio and
YELLOW
for video.
A/V1 and A/V2
jacks have identical
functions. Any
compatible video
equipment can be
connected to either
set of jacks.
A solid Blue screen
with the word
Video1 or Video2
displayed means
that the Video mode
is selected, but no
signal is being
detected at the
Video jack. Check
connection, and
turn on external
equipment.
Make sure you select
TV channel to match
your VCR output
(Ch. 3 or 4).
You may be able to
use the remote
control to operate
your VCR, Cable
Box and TV.
(See page 7.)
12

USING THE AUDIO/VIDEO INPUT JACKS

CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables.
1. Connect signal (cable) to splitter
2. Connect cable from splitter
3. Connect cable from splitter
4. Connect cable from cable box out
5. Connect DVD, VCR, DSS, or other equipment's Audio Out (R/L) and Video Out to the
TV Audio Input (R/L) and Video Input
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L)
Input.
Note: Use either A/V1 or A/V2 Input jacks.
Optional
6. Connect DVD, VCR, DSS, or other equipment's S-Video Out to the TV S-Video
In Jack .
Note: Using the S-Video In 1 jack overrides the Video1 Input jack and the S-Video In 2
jack overrides the Video2 In jack (Model AVM-3680G).
7. Press POWER to turn on the TV. See
8. Press the VIDEO MODE key
equipment you have connected to the A/V1 and A/V2 jacks.
Follow the same procedure to connect other compatible video equipment to the second set
of A/V jacks.
DVD Player
Splitter
IN
.
to the TV 75Ω (ohm) terminal
to cable box .
to VCR Antenna In terminal
.
.
Turn on external equipment also.
to select program source: TV signal or signal from the
IN
FROM ANT.
OUT
OUT TO TV
Back View
of a VCR
UHF/VHF/CATV
75Ω
OUT
Cable Box
TV A/V Input
Rear Jacks
(MODEL AVM-3680G)
.
.
VCR
VIDEO
MODE
1
Remote Control
A/V JACK
RF
IN
CHANNEL
R- AUDIO -L
CH3 CH4
OUT
R- AUDIO -L
S-VIDEO IN -1 S-VIDEO IN -2
(MONO)
AUDIO
R AUDIO L VIDEO
VIDEO
INPUT
L
1
AUDIO
VIDEO R
INPUT
AUDIO
R AUDIO L VIDEO
2
OUTPUT
(MONO)
TV CABLE
POWER
RESET
2 3
VIDEO
VIDEO