Silence All - Sanyo VL-2300 Phone Manual

Tip:
You can select Once or Repeat Alert if you select Ready Link Calls, R-Link
Missed, Voicemail, or Messaging. Repeat Alert sounds an alert every two
minutes for twenty minutes. (For Ready Link Calls, it sounds for 20 seconds
continuously.)
6.
Use your navigation key to select a setting and press

Silence All

There may be times when you need to silence your phone
entirely. The phone's Silence All option allows you to mute all
sounds without turning your phone off.
To activate Silence All:
1.
Press
2.
Select Settings and press
3.
Select Sounds and press
4.
Select Ringer/Key Vol. and press
5.
Select Ringer Volume and press
6.
Press the navigation key down until Silence All appears
on the display and press
Shortcut:
To activate Silence All, you can press the Side Up/Down key down
repeatedly in standby mode until Silence All appears on the display screen.
Tip:
When Ringer Volume is set as Silence All, other items are changed to Off
and cannot be highlighted.
To deactivate Silence All:
From standby mode, press the Side Up/Down key up
repeatedly to select a desired volume level.
Section 2B: Controlling Your Phone's Settings
to access the main menu.
.
.
.
.
.
.
59