Adjusting The Earpiece Or Speakerphone Volume; Adjusting The Headset, Applications, Or Power-On/Power-Off Volume; Silence All; Display Settings - Sanyo SCP-85H Operating Manual

Table of Contents

Advertisement

Adjusting the Earpiece or Speakerphone Volume

To adjust the earpiece or speakerphone volume:
1. Select MENU/OK > Settings > Sounds > Volume.
2. Select Earpiece or Speakerphone.
3.
Using your navigation key, select your desired volume level and press Done (left softkey).
Adjusting the Headset, Applications, or Power-On/Power-Off
Volume
To adjust the headset, applications, or power-on/power-off volume:
1. Select MENU/OK > Settings > Sounds > Volume.
2. Select Headset, Applications, or Start-up/Pw-off.
3. Using your navigation key, select your desired volume level and press Done (left softkey).
Alert Notification
Your phone can alert you with an audible tone when you change service areas, when there are
incoming calls/messages, or when your network signal is fading. Your phone can also alert you
once a minute during a call.
To set alerts:
1. Select MENU/OK >Settings > Sounds > Alerts.
2. Select an option and press MENU/OK.
Out of Service sets alert On or Off for network services parameter changes.
Connect to set an alert to notify you when your call has been connected.
Messaging sets alert to notify you of text, Picture Mail, voicemail, or SMS Voice messages.
Beep Each Minute sets a minute reminder that beeps ten seconds before the end of each
minute during a call.
Signal Fade/Call Drop sets alert to notify you when your phone loses a signal during a
call.

Silence All

There may be times when you need to silence your phone entirely. The phone's Silence All
option allows you to mute all sounds without turning your phone off:
To activate Silence All:
> With the phone open, press and hold the Side Volume key down in standby mode. (The
screen will display "Silence All.")
To deactivate Silence All:
> With the phone open press the Side Volume key up repeatedly to select a desired volume
level

Display Settings

Changing the Text Greeting

The text greeting can be up to 15 characters and is displayed on your phone's screen in
standby mode. You may choose to display a custom greeting or default greeting.
To display or change your custom greeting:
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scp-8500

Table of Contents