Using Your Phone's Battery And Charger - Sanyo VL-2300 Phone Manual

Using Your Phone's Battery and Charger

Battery Capacity
Your Sprint PCS Phone is equipped with a Lithium Ion (LiIon)
battery. It allows you to recharge your battery before it is fully
drained. The battery provides up to 3.25 hours of continuous
digital talk time (up to 1.75 hours in analog).
When the battery reaches 5% of its capacity, the battery icon
blinks. When there are approximately 5 minutes of talk time
left, the phone sounds an audible alert and then powers
down.
Note:
Long backlight settings, searching for service, vibrate mode, and
browser use affect the battery's talk and standby times.
Tip:
Be sure to watch your phone's battery level indicator and charge the
battery before it runs out of power.
Installing the Battery
To install the LiIon battery:
1.
Insert the battery into the opening on the back of the
phone and gently press down.
2.
Place the battery cover into the position as indicated in
the diagram, then slide it until you hear it snap into
place.
22 Section 2A: Your Sprint PCS Phone – The Basics