Alert Notification; Silence All - Sanyo SCP-3200 User Manual

Alert Notification

Your phone can alert you with an audible tone when you
change service areas, once a minute during a voice call, when
there are incoming or missed Sprint Ready Link calls, or when
your network signal is fading.
To set alerts:
1.
Select
2.
Select Service, Ready Link, Voicemail, Messaging,
Minute Beep, or Signal Fade and press
3.
Use your navigation key to select a setting and press

Silence All

There may be times when you need to silence your phone
entirely. The phone's Silence All option allows you to mute all
sounds without turning your phone off.
To activate Silence All:
With the phone open, press the Side Volume key (
down repeatedly until "Silence All"appears.
Note: You can also activate Silence All using the main menu:
1. Select MENU > Settings > Sounds > Volume > Ringer .
2. Press the navigation key down until Silence All appears on
the display and press Done (left softkey).
To deactivate Silence All:
With the phone open, press the Side Volume key (
up repeatedly to select a volume level.
Section 2B: Controlling Your Phone's Settings
> Settings > Sounds > Alerts.
.
.
)
)
55